Data Lifeguard Tools User Manual Pdf

title:

Western Digital Tools Utility

Vendor:Western Digital
Category:Storage
License:Utility
OS: DOS
Version: 11.2
File Size: 29.05 Mb
Release: 30 Dec 2006
Update: 7 Oct 2008
Filename: dlg_v11_2.zip
  1. Data Lifeguard Tools User Manual Pdf
  2. Data Lifeguard Tools User Manual Pdf File
Download Instruction
Data Lifeguard Tools User Manual Pdf

Oct 12, 2016 data lifeguard diagnostics for dos iso is here and works with yumi and xboot so far just watch the video. USER MANUAL Splash Screen Options The following options are available in the Data Lifeguard Tools splash screen: Create a Data Lifeguard Bootable Installation Diskette — If your system cannot boot from a CD or you prefer to use a floppy diskette instead, you can create a bootable Data Lifeguard Tools diskette by clicking this option.

Manual
Brand:Western Digital, Product:Storage, Model: Data Lifeguard, Utility: 11.2, OS: DOS. Western Digital Data Lifeguard Tools 11.2 DOS(CD) was collected from Western Digital official site for Western Digital Storage. In order to ensure the right driver download, Official driver links from Western Digital are listed at first. If the official driver can not be downloaded, a copy of official driver can be provided at local server download.opendrivers.com, download1.opendrivers.com, or dl2.opendrivers.com. Besides, Both the driver developer's home page and driver download and support page be provided as well in my Western Digital page.
Official Driver Download
Pdf
Sponsored links

Data Lifeguard Tools User Manual Pdf

Backup Download Server

Data Lifeguard Tools User Manual Pdf File

Download Now -> DLG_V11_2.zip download site1 <<-- Backup Server
Western Digital Data Lifeguard Tools 11.2 DOS(CD).

This zip file contains a bootable CD image of the Data Lifeguard v11.2 installation CD which contains both DOS and Windows versions and was written specifically for the installation of Western Digital EIDE hard drives. If your computer system already has a hard drive installed with an operating system of Windows 98SE or greater, you should use the Windows version of Data Lifeguard for best results. The DOS version is required if installing a hard drive in a new system without existing operating system support. If you plan on copying the contents of a boot drive, Western Digital recommends using the DOS version of Data Lifeguard Tools.

The driver can be applied to the following product models:
Software Manual
Data Lifeguard Diagnostic Utility
WD Data Lifeguard Diagnostic Utility (DLGDIAG)
User Manual
Information furnished by WD is believed to be accurate and reliable; however, no responsibility is assumed by WD for its use nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of WD. WD reserves the right to change specifications at any time without notice. Western Digital is a registered trademark; and WD, the WD logo, and Data Lifeguard Tools are trademarks of Western Digital Technologies, Inc. Other marks may be mentioned herein that belong to other companies. © 2006 Western Digital Technologies, Inc. All rights reserved. 2779-701022-A00 July 2006
Table of Contents 1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 DLGDIAG Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 When to Use DLGDIAG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Before using DLGDIAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
DLGDIAG for Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Supported Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Supported Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing DLGDIAG for Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using DLGDIAG for Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
DLGDIAG for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Supported Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Creating Bootable DLGDIAG for DOS Disks. . . . . . . . . . . . . . . . . . . . . 10 Using DLGDIAG for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Command Line Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Error/Status Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4
Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
TABLE OF CONTENTS – i
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
1
Introduction The Data Lifeguard diagnostic utility (DLGDIAG) is designed to test WD hard drives for errors. If DLGDIAG reports errors, you can use the program to attempt to restore the hard drive to a defect-free status. DLGDIAG supports WD external and SATA hard drives. It also supports EIDE hard drives installed on both primary and secondary IDE ports (either the motherboard or a controller card). DLGDIAG must be run separately to test each WD hard drive in the system. Depending on your hard drive model and diagnostic requirements, you can use either the Windows or DOS version of DLGDIAG. Windows and DOS versions of the DLGDIAG software are available at support.wdc.com/download.
DLGDIAG Options Windows „
„
„
„
Quick Test — performs a quick S.M.A.R.T. self-test to gather and verify the Data Lifeguard information contained on the drive. Extended Test — performs a Full Media Scan to detect bad sectors. Test may take several hours to complete depending on the size of the drive. Write Zeros — writes zeros to the drive using the Full Erase or Quick Erase option. Erases all data on the drive by writing zeros to each sector – file system and data will be lost. View Test Results — displays results for the last hard drive tested.
DOS „
Select Drive — selects the hard drive to test and displays status for all hard drives.
„
Quick Test — tests the drive quickly for any major physical problems.
„
Extended Test — checks the drive thoroughly for any major physical problems.
„
„ „
„ „
Write Zeros To Drive — wipes any and all data off the drive. Use this option when your data is no longer usable or recoverable. View Test Results — displays results for the last hard drive tested. Print Test Results — prints results for the last hard drive tested (USB printers not supported). Log File Open/Close — stores results for all hard drives tested (DLGDIAG.LOG) Enter & Print RMA Information — enters and prints RMA information for returning a hard drive to WD.
„
Help — brief descriptions of each option and explanations of error codes.
„
Quit — reboot your system once you have completed the selected tasks.
INTRODUCTION – 1
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
When to Use DLGDIAG If the hard drive reports errors, if you are unable to access files on the hard drive, or if another diagnostic utility such as SCANDISK, CHKDISK, DEFRAG, or Norton Utilities reports errors on the hard drive, run DLGDIAG to determine if they are hard drive-related. DLGDIAG does not report errors associated with the system BIOS, controller card, or motherboard of your system. DLGDIAG can be used at any time to test for hard drive errors. If you experience problems accessing files or encounter other apparent hard drive errors, you can safely run the Quick Test option to confirm your hard drive integrity. DLGDIAG’s Repair Drive feature allows the user to restore any errors found during the Extended Test scan of your hard drive without destroying all data on the drive. DLGDIAG does not resolve mechanical damage such as noisy drives or drives that do not spin up. Contact WD technical support (see “Service and Support” on page 19) if you have a hard drive that exhibits the above difficulties.
Before using DLGDIAG If used properly, DLGDIAG does not overwrite data on the hard drive during the scan and will not result in data loss. However, you should always back up your data before running any diagnostic utility. Back up all data on your hard drives(s) before using DLGDIAG. CAUTION: Back up all data on your hard drive(s) before using DLGDIAG. You will erase all data if the Write Zeros To Drive option is invoked.
INTRODUCTION – 2
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
2
DLGDIAG for Windows DLGDIAG for Windows is a Windows version of the Data Lifeguard Diagnostics utility. The utility can perform drive identification, diagnostics, and repairs on a WD FireWire, EIDE, or USB drive. In addition, it can provide the drive's serial and model numbers.
Supported Products Internal Hard Drives „
WD SATA
„
WD EIDE
External Hard Drives „
WD USB
„
WD FireWire®
„
WD Combo
Supported Operating Systems „
Windows XP
„
Windows 2000
„
Windows Me
„
Windows 98SE
DLGDIAG FOR WINDOWS – 3
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Installing DLGDIAG for Windows Important: If you have a pop-up blocker installed, you may need to disable it to download the DLGDIAG software. 1. Go to support.wdc.com/download and download the Data Lifeguard Diagnostics for Windows program (WinDLG.zip). 2. Extract and run the Setup.exe program. 3. The WD Diagnostics InstallShield Wizard screen appears. Click the Next button.
4. Click Install.
5. Click Finish.
DLGDIAG FOR WINDOWS – 4
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Using DLGDIAG for Windows 1. Click the Start button and point to Programs --> WD Diagnostics- WD Diagnostics. 2. Click I accept this License Agreement, then click Next.
3. The main program screen displays. The top window shows the drives in your system that are available for testing. The model number, serial number, and capacity of each drive are displayed. In the bottom window, the partition information for the selected drive is displayed. Highlight the drive and double-click the physical drive icon on the top row to run diagnostic testing.
4. The DLGDIAG - Select an Option window displays the four DLGDIAG for Windows options.
DLGDIAG FOR WINDOWS – 5
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Quick Test Quick Test performs a S.M.A.R.T. drive quick self test to gather and verify Data Lifeguard information on the drive. Note: Quick Test will perform a S.M.A.R.T. drive self-test only if it's supported and accessible by DLGDIAG. Otherwise. it will perform a short media scan. The S.M.A.R.T. feature is not supported for external hard drives connected to the computer via the FireWire interface. Some IDE and SATA controllers do not allow S.M.A.R.T. information to be read from the hard drive. For more information, please contact the manufacturer of the controller to determine if the controller supports S.M.A.R.T. attribute reading. 1. Click Quick Test, then click Start.
2. Close any open programs to prevent data loss, then click OK. 3. Quick Test begins. The test may take several minutes to complete depending on the size of the hard drive tested. When the test is complete, click Close.
Extended Test Extended Test performs a full media scan to detect bad sectors. This test may take up to several hours to run depending on the size of the drive. 1. Click Extended Test, then click Start.
2. Close any open programs to prevent data loss, then click OK. DLGDIAG FOR WINDOWS – 6
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
3. Extended Test begins. The test may take several hours to complete depending on the size of the hard drive tested. When the test is complete, click Close. Write Zeros Write Zeros writes zeros to the drive with the option to perform a quick erase or full erase. Selecting the write zeros option the file system and all data on the drive being tested. CAUTION: Back up all data on your hard drive(s). You will erase all data if the Write Zeros option is invoked. 1. Click Extended Test, then click Start.
2. If you are sure that you want to write zeros to the drive, click Yes.
3. Select Quick Erase or Full Erase, then click OK.
4. Write Zeros begins. When Write Zeros is complete, click Close.
DLGDIAG FOR WINDOWS – 7
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
View Test Result View Test Result displays the results of the most recent test(s) run on your system’s hard drive(s). 1. Click View Test Result, then click Start.
2. The test results display.
DLGDIAG FOR WINDOWS – 8
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
View S.M.A.R.T. Disk Information S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) monitors drive performance and calibration characteristics, and predicts imminent drive failure. Drive attributes and their associated values are listed in the SMART Disk Information screen. Note: S.M.A.R.T. disk information is available only when the S.M.A.R.T. feature is supported and accessible by DLGDIAG. Under the SMART Status column, a question mark icon displays if the S.M.A.R.T. feature is not available. A red X icon displays for a specific attribute if and only if it's value falls below the threshold value and the warranty value is 1. Some IDE and SATA controllers do not allow S.M.A.R.T. information to be read from the hard drive. For more information, please contact the manufacturer of the controller to determine if the controller supports S.M.A.R.T. attribute reading. 1. Highlight the drive and click the S.M.A.R.T. disk info icon on the top row to view S.M.A.R.T. disk information.
2. The S.M.A.R.T. disk information for the selected drive displays.
DLGDIAG FOR WINDOWS – 9
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
3
DLGDIAG for DOS DLGDIAG for DOS is a DOS version of the Data Lifeguard Diagnostics utility that determines the physical condition of a WD hard drive. If you are having computer problems that you suspect are hard drive related, you can test your drive with this tool. This diagnostic utility is designed for WD hard drives larger than 8.4 GB with a model number starting with “WD.”
Supported Products Internal Hard Drives „
WD SATA
„
WD EIDE
Creating Bootable DLGDIAG for DOS Disks Important: If you have a pop-up blocker installed, you may need to disable it to download the DLGDIAG software. A 3.5-inch floppy or CD-RW drive is required to create a bootable DLGDIAG for DOS disk. Floppy Disk 1. Go to support.wdc.com/download and download the Data Lifeguard Diagnostics for DOS (Floppy) program (DlgDiagvXXXx.exe or DlgDiagvXXXx.zip) to your desktop. Extract the DlgDiagvXXXx.exe file from DlgDiagvXXXx.zip if you download the Zip file. 2. Double-click the DlgDiagvxxx Diskette Creator icon on your desktop, follow the instructions in each screen to create your DLGDIAG floppy disk. You can now boot to your DLGDIAG floppy disk. Make sure the boot order in your system BIOS is set to boot from the floppy drive first. CD-ROM 1. Go to support.wdc.com/download and download the Data Lifeguard Diagnostics for DOS (CD) program (DiagXXXxCD.iso or DiagXXXxCD.zip) to your desktop. Extract the DiagXXXxCD.iso file from DiagXXXxCD.zip if you download the Zip file. 2. Use a CD burning program to burn a CD from the DiagXXXxCD.iso image. Refer to your CD burning program Help or user manual for details. You can now boot to your DLGDIAG CD. Make sure the boot order in your system BIOS is set to boot from the CD-ROM drive first.
DLGDIAG FOR DOS – 10
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Using DLGDIAG for DOS CAUTION: Back up all data on your hard drive(s) before using DLGDIAG. This utility may write to the drive. As with all utilities that write to a drive, it is recommended that you back up your data before proceeding. 1. Boot your computer to the DLGDIAG for DOS CD or floppy disk (see “Creating Bootable DLGDIAG for DOS Disks” on page 10. 2. The DLGDIAG license agreement displays. Use the down arrow key to read through the entire licence. Press Esc. 3. Press Y to start the program. 4. The DLGDIAG main menu displays. Use the up/down arrow keys to navigate the options and the Enter key to select an option.
Select Drive The Select Drive option shows a list of all drives installed and the current status of each drive. 1. For each drive that shows a status of 'DRIVE NOT TESTED', select the drive by using the up/down arrows until the desired drive is highlighted and press Enter.
2. Press Esc to return to the main menu and test the drive. DLGDIAG FOR DOS – 11
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Quick Test The Quick Test is designed to intelligently gather and verify all of the Data Lifeguard information contained on the drive. The Quick Test can determine with a high level of confidence that a drive is defect-free in a short amount of time. For maximum confidence, the Extended Test is recommended. The Quick Test option may not be available on earlier hard drives. 1. In the Quick Test option screen, press R to run the Quick Test.
2. DLGDIAG reports the status of the hard drive. A status message such as “Test Completed Without Errors” displays along with a corresponding error/status code. Press Esc to return to the main menu. See the list of error/status codes on page for more information. Extended Test Extended Test checks the drive thoroughly for any major physical problems. For most computers the Extended Test takes 5-20 minutes to test one drive. Larger drives take longer to test. The performance of the computer also affects the test time. 1. In the Extended Test option screen, press R to run the Extended Test.
2. DLGDIAG reports the status of the hard drive. A status message such as “Test Completed Without Errors” displays along with a corresponding error/status code. Press Esc to return to the main menu. See the list of error/status codes on page for more information. DLGDIAG FOR DOS – 12
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Write Zeros To Drive If you tested the hard drive, checked all hardware in the system, and verified that the BIOS is correctly set up, and are still experiencing problems, you might want to reinstall the software on your system. Before reinstalling the software, you can use the Write Zeros To Drive option to erase the entire hard drive, including the MBR (master boot record), all partition tables, and all data. CAUTION: Back up all data on your hard drive(s). You will erase all data if the Write Zeros To Drive option is invoked. 1. Press F for Full Erase or Q for quick erase.
2. Press Esc to return to the main menu. View Test Results View Test Results displays the results of the most recent test run on your currently selected hard drive including results messages and error/status codes. Print Test Results Print Test Results prints the results of the most recent test run on your currently selected hard drive including results messages and error/status codes. You must have a printer properly connected to your computer to use this option. Log File Open/Close The DLGDIAG.LOG file stores results for all drives tested. 1. To open the log file, select Log File Open/Close from the main menu. 2. Press O to open the log file. To close the log file, select Log File Open/Close from the main menu and press C.
DLGDIAG FOR DOS – 13
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Enter & Print RMA Information If the hard drive is under warranty and DLGDIAG determines that the hard drive is unrepairable, obtain an RMA (Return Material Authorization) number and instructions for product return from WD Technical Support at support.wdc.com/warranty. To complete the RMA information, select Enter and Print RMA Information from the DLGDIAG main menu, then fill out all fields in the Enter and Print RMA Information screen. You must have a printer properly connected to your computer to print RMA information. Help 1. Select Help from the main menu to access the DLGDIAG.txt Help file. 2. Use the up and down arrow keys to read through the text Help file. 3. Press Esc to return to the main menu. Quit 1. To close DLGDIAG, select Quit from the main menu. A message displays prompting you to reset the system to reinitialize the BIOS and hard drive(s). 2. Press Ctrl-Alt-Delete or turn the power off to restart the system. 3. Remove the floppy disk from the drive and reboot the system.
Command Line Switches DLGDIAG supports the following command line options: Command Line -A -B -C -Dx -E -FWRITE -G -H -L -Ox -Px -Q -R -S -V -WRITE
Description Disable error code for SMART failures Check SMART status without menus Enable output to comma file Select drive x only, where x is 0-15 or ? to show drive info Run extended test without menus - with drive repair Write zeros to the first and last million sectors Show test history on the SMART log area Enable appending of log to history log file Disable output to log file Specify log file location, where x is the full path Access drives at baseport x (hex address) only Run Quick Test without menus Run performance test without menus Skip rebooting after a run of the program Run extended test without menus - without drive repair Write zeros to the entire drive
DLGDIAG FOR DOS – 14
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Error/Status Codes Go to support.wdc.com for further information on many of the error codes listed below as well as error codes from previous versions of Data Lifeguard Diagnostics. If you encounter the same error code more than once after restesting, create an RMA (see “Enter & Print RMA Information” on page 14). Description COMPLETED WITHOUT ERRORS ABORTED BY HOST INTERRUPTED BY DRIVE RESET INCOMPLETE DUE TO ERROR UNKNOWN ELEMENT FAILURE ELECTRICAL ELEMENT FAILURE SERVO/SEEK ELEMENT FAILURE READ ELEMENT FAILURE HANDLING FAILURE UNKNOWN TEST STATUS UNKNOWN TEST STATUS UNKNOWN TEST STATUS UNKNOWN TEST STATUS UNKNOWN TEST STATUS UNKNOWN TEST STATUS TEST IN PROGRESS ERRORS FOUND UNKNOWN ERROR SEEK TIMEOUT WRITE FAULT ERROR DRIVE NOT READY BUSY GLITCH TRACK 0 ERROR CHECK SUM ERROR SEEK NOT COMPLETE DRQ WAS SET DRQ NOT EXPECTED DIAG COMMAND ERROR IRQ TIMEOUT DRIVE TABLE ERROR TRANSFER RATE ERROR ICRC ERROR IDNF ERROR UNCORRECTABLE ECC ERROR DAM ERROR NO MULTI NO DRIVE FOUND SERVO ERROR 121 UNKNOWN ERROR UNKNOWN ERROR
Error/Status Code 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 DLGDIAG FOR DOS – 15
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Description CORRECTED DATA BAD TRACK UNKNOWN ERROR UNKNOWN ERROR BUFFER MISCOMPARE G-LIST ERROR INVALID SERIAL SERIAL RETRY COMMAND ERROR ILLEGAL ID BUSY TIMEOUT DRQ TIMEOUT BAD SECTOR RELOCATED SECTOR STILL BUSY TIMEOUT DRQ NOT EXPECTED DRQ TIMEOUT ECC UNKNOWN ERROR TK-TK SEEK ERROR RANDOM SEEK ERROR THIRD STROKE ERROR FULL STROKE ERROR SEEK OVERHEAD ERROR BAD ID PARAMETERS NOT SELECTED MASTER SLAVE ERROR UNKNOWN ERROR PARK ERROR WRITE PROTECT ERROR MEDIA ERROR MEDIA CHANGE ERROR MEDIA CHANGE REQ ERROR NO MEDIA ERROR SET MAX ERROR Q DMA SERVICE ERROR SMART ERROR UNKNOWN COMMAND RESET SIGNATURE READY EXPECTED UNKNOWN ERROR DRIVE NOT TESTED NON-WD DRIVE DRIVE NOT SUPPORTED WRITE LOG ERROR MISSING LOG FILE ABORTED BY USER MEMORY ALLOCATION ERROR
Error/Status Code 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 200 201 202 203 204 205 206 DLGDIAG FOR DOS – 16
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
Description CRITICAL RESOURCE ERROR FATAL ERROR SELF TEST FAILED TO RUN SELF TEST INCOMPLETE 2-9 UNCORR ECC ERRORS 10+ UNCORR ECC ERRORS 2-9 DAM ERRORS 10+ DAM ERRORS 2-9 IDNF ERRORS 10+ IDNF ERRORS 2-9 SERVO ERRORS 10+ SERVO ERRORS DRIVE CABLE ERROR DRIVE IS LOCKED TEST NOT SUPPORTED DRIVE FAILED THE TEST ERRORS REPAIRED ERRORS NOT REPAIRED TOO MANY ERRORS FOUND SECTOR RELOCATION ERROR SMART NOT SUPPORTED
Error/Status Code 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227
DLGDIAG FOR DOS – 17
DATA LIFEGUARD DIAGNOSTICS (DLGDIAG) USER MANUAL
4
Service and Support If you need additional information or help during installation or normal use of this product, visit our product support Web site at support.wdc.com or send an e-mail message to WD Technical Support using the online form. You may also call the phone numbers listed below. When calling for support, have your WD hard drive serial number, system hardware, and software versions available. USA/Canada/Outside USA (Central Time)
Europe (Central European Time)
Telephone Numbers
800.ASK.4WDC
+31.20.4467651
Monday – Thursday
9:00 am – 7:00 pm
9:30 am – 12:00 noon 1:00 pm – 5:30 pm
Friday
9:00 am – 5:00 pm
9:30 am – 12:00 noon 1:00 pm – 4:00 pm
Saturday
8:00 am – 5:00 pm
SERVICE AND SUPPORT – 18