Harman Kardon Avr 700 User Manual

Over the years, Harman Kardon products have become easier to use while offering more features and sounding better than ever. The AVR 70, AVR 700 and AVR 70C 5.1-channel digital audio/video receivers (AVRs) continue this tradition with some of the most advanced audio and video processing capabilities yet and a wealth of listening and viewing. Harman-Kardon AVR 700 User Manual. Set up the avr, continued. Harman-Kardon Receivers and Amplifiers. Manuals Directory ManualsDir.com - online owner manuals.

Advertising

AVR 700/AVR 70/AVR 70C

14

Set Up the AVR

Set Up the AVR

Turn On the AVR

1. Set the front-panel main power switch to “on.” (the front-panel Standby indicator

will glow amber.)

2. press the front-panel on/Standby switch.

Phones

USB

Video 3

Video

R

L Audio

Stereo

Power

Surr.Select

Tuning

AM/FM

Preset

Source

Memory

Folder

5V 500A

on/Standby

button

main power

Switch

Standby

Indicator

unless you will not be using the AVr for an extended period of time, leave the main power

switch set to “on.” when the main power switch is turned off, any settings you have

programmed will be preserved for up to two weeks.

IMPORTANT NOTE: If the PROTECT message ever appears in the Message

display, turn off the AVR and unplug it. Check all speaker wires for a short

circuit (“+” and “–” wires touching). If none is found, bring the unit to an

authorized Harman Kardon service center for inspection and repair before

using it again.

Using the On-Screen Menu System

Although it’s possible to configure the AVr using only the remote and the front-panel

message display, it is easier to use the on-screen menu system.
to access the menu system, turn on your tV and select the tV’s composite video input

Harman Kardon Avr 700 User Manual 2016

where you connected the AVr in Connect Your TV or Video Display, on page 11.
press the remote control’s Setup button. the AVr’s on-screen display (oSd) System

Setup menu will appear on the tV.

Harman Kardon

the System Setup menu consists of five submenus: Speaker Set, hdmI Set, parameter,

Auto power control and Speaker on/off.
use the up/down/left/right buttons on the remote to navigate the menu system, and

press the ok button to select a menu or setting line, or to enter a new setting.
the current menu, setting line or setting will appear in the front-panel message display,

as well as on screen.
to return to the previous menu, press the remote’s bAck button. to exit the menu

Harman Kardon Avr 700 Owners Manual

system, press the Setup button.
follow the instructions in this Set Up the AVR section to configure your home theater

system. you may return to these menus at any time to make additional adjustments.
before you begin initial setup, all loudspeakers, a video display and all source devices

should be connected to the AVr. you should be able to turn on the AVr and view the

System Setup menu when you press the Setup button. If necessary, reread the Making

Connections section and the beginning of this section before continuing.

Configure the AVR for Your Speakers

1. turn on your tV and select the tV’s composite video input where you connected the

AVr in Connect Your TV or Video Display, on page 11.

Harman

2. press the remote control’s Setup button. the AVr’s on-screen display (oSd) System

Setup menu will appear on the tV.

3. use the remote’s arrow and ok buttons to select “Speaker Setup.” the Speaker Setup

menu will appear.

4. Select “Speaker Settings.” the Speaker Settings menu will appear.

5. use the remote’s left and right arrow buttons to select off, SmAll or lArge for the

front, center and Surround speaker positions, depending on the speakers you have

connected to the receiver.

off: Select this setting if you have not connected a speaker in that position (not available

for the front speakers).
SmAll: Select this setting if the speaker is not capable of producing clean, deep bass

energy at output levels that match those produced by a powered subwoofer. All bass

below the crossover frequency (see Step 6, below) in that channel is removed from that

speaker and is sent to the subwoofer (or to the front speakers if Subwoofer is set to no).

Harman Kardon Avr 700 Manual

most speakers (unless they are large and powerful) should be considered SmAll.
lArge: Select this setting if the speaker is capable of producing clean, deep bass energy

at output levels that match those produced by a powered subwoofer. All bass in that

channel is sent to that speaker.
note: If your system has a subwoofer and you set the front speakers to lArge, the

subwoofer may not output audio except for dolby digital- and dtS-encoded program

material that contains lfe channel information. If you set your front speakers to lArge

and you want your subwoofer to reproduce bass from all program material, set the

Subwoofer to pluS (see below).
for Subwoofer, select yeS (if your system has a subwoofer), no (if your system does not

have a subwoofer), or pluS (if your system has a subwoofer, you set your front speakers

to lArge and you want your subwoofer to reproduce bass from all program material).
when you’re finished, record your settings in table A2 of the Appendix, on page 21, then

press the remote control’s bAck button to return to the Speaker Setting menu.
6. (note: If your system does not have a subwoofer, skip to step 7.) press the bAck button

and select “crossover.” the crossover menu will appear

Advertising
This manual is related to the following products:
Popular Brands
Popular manuals